Elmomc SimplIQ Command Reference Uživatelský manuál stáhnout pdf (Strana 136)

RG - Recorder Gap

Purpose:

Defines the frequency per sampling times that the recorder is activated.

Because the recorder has a limited storage capacity, if it operates at the sampling time of

the drive, the recorder will operate for a very short time. For longer recording times, the

time interval between consecutive data recordings must be increased. The RG parameter

trades recording resolution against recording time. With RG=1, the sampling time of the

recorder is WS[29]. Be aware that recorder sampling time depends on the TS value and

the specific unit mode (UM).

Attributes: Type: Parameter, Integer

Source: Program, RS-232, CANopen

Restrictions: Recorder inactive (RR=0 or RR=-1)

Default value: 1 (RS), Non-volatile

Range: [1…4096]

Unit modes: All

Activation: Next initiation of the recorder (RR)

If the drive has stored a previously recorded data vector, setting RG will invalidate

this data. Invalidated data cannot be retrieved.

Žádné komentáře

Elmomc SimplIQ Command Reference Uživatelský manuál Strana 136