Elmomc SimplIQ Command Reference Uživatelský manuál stáhnout pdf (Strana 135)

RC - Define Recorded Variables

Purpose:

Defines which signals are to be recorded.

The drive can record a range of signals for performance verification and debugging. The

first step of the recording process is the definition of the recorded variable by assigning a

value to RC, a bit field. Each “on” bit in the binary representation of RC defines a signal

to be recorded. The host can map many optional variables to any bit of RC from bit 0 to

bit 15.

A valid RC defines at least one recorded variable. Up to eight variables can be selected.

Attributes: Type: Parameter, Integer

Source: Program, RS-232, CANopen

Restrictions: Recorder inactive (RR=0 or RR=-1)

Default value: 0 (RS), Non-volatile

Range: See previous description

Unit modes: All

Activation: Next initiation of recorder (RR)

Notes:

 If the drive has stored a previously-recorded data, setting RC will invalidate this

data. Invalidated data cannot be retrieved.

 The total number of data points that may be recorded is fixed. Therefore, the

number of points per signal depends on the number of signals recorded

simultaneously: the more signals recorded, the fewer points available for each

signal.

Žádné komentáře

Elmomc SimplIQ Command Reference Uživatelský manuál Strana 135